Epix10+ Strobe Auxiliary Light 10" (Powerboost)

Epix10+ Strobe from Ledson is an innovative series of auxiliary lights that enhance the visual appearance and functionality of the vehicle. The series is equipped with five different strobe patterns, one of which is ECE R65 approved. The proprietary Swedish design language, combined with high performance, gives the vehicle a particularly unique and exclusive appearance that attracts attention. The construction combines very high brightness with a sophisticated design.

Strobe patterns

Available strobe patterns are single strobe (ECE R65 approved), double strobe, triple strobe, quadruple strobe and continuous hyper strobe.

Synchronisable and with alternating strobe patterns

The Epix10+ Strobe can be synchronised with other units in the same series, which means that all auxiliary lights can be set to the same strobe pattern and strobe in complete unison. The alternating strobe pattern function also makes it possible to divide the auxiliary lights into two groups that strobe in opposition to each other, for example, right/left or upper/lower. All five strobe patterns can be used alternately, giving a total of ten combinations of strobe patterns. Synchronisation and alternating operation can be used with an unlimited number of Auxiliary lights without any restriction on the number of units.

Dynamic position light

The Epix10+ Strobe has a dynamic position light where the light turns on with a sweeping motion from one side of the Auxiliary light to the other before reaching full brightness. This dynamic ignition gives the vehicle a distinct and clear visual character.

Pulse-controlled powerboost

Epix10+ Strobe is equipped with Ledson powerboost, an extra power mode that provides maximum brightness when needed. Activation is via the high beam lever, which makes it possible to quickly adjust the amount of light from the Auxiliary light to suit the prevailing conditions. The latest generation of Ledson's powerboost is easily controlled via the light switch (strobeing with the high beam lever) according to the steps specified in the instructions. The Auxiliary light is supplied in E-approved mode and the power boost mode is only activated after the accompanying instructions have been followed.